Structural Pipe Fitting Application Projects

Pipe Railings Fittings Single Socket Tee 101. We can set one pipe in one end, insert another in the other end, and then tighten the screw of the Single Socket Tee to connect the two pipes at 90° and form a T shape. Single Socket Tee is a structural pipe fitting used to build most geometric structures, such as furniture, handrails, and guardrails.

Pipe Railings Fittings Variable Elbow 40～70 Degree 123 is a standard elbow in pipe railings fittings. Its socket opening is just suitable for inserting the pipe, but the inside of the socket is more considerable to allow the tube to move inside. So we can adjust the two tubes so that the inner angle is between 40 and 70 degrees during use. The elbow of 123 Variable Elbow 40~70 Degree is round, and the structure is very safe. We often use 123 Variable Elbow when assembling sloped guardrails or handrails.

149 Sleeve Joint is a structural pipe fitting that can be used to build Pipe Railing Systems. Its role is to connect two pipes to increase the length of the transverse railing in Pipe Railing Systems. 149 Sleeve Joint can only be used in straight guardrails or handrails because it is straight. If you need to adjust the angle of the horizontal railing, you can choose to use, 123, 124, 125, and 125H. If you need to make the horizontal railing look more even, you can choose to use 150 internal joints. The manufacture of 149 Sleeve Joint mostly uses malleable steel and ductile iron as raw materials and uses a sand casting process. If it is an aluminum structural pipe fitting, a casting process is required. HULK Metal can provide excellent structural pipe fittings production services. You can contact us no matter what your needs are.

158 Four Socket Cross is a kind of Safety Rail Fittings that can add four safety rails to the column, the pipes are on the same plane, and the adjacent two are vertical. We can use it to build simple shelves or build safety fences to divide the area where goods are stored, or DIY other structures. The 158 Four Socket Cross produced by HULK Metal is made of malleable steel and ductile iron, and its surface treatment is mainly galvanized and powder sprayed. Our supply chain has high-standard investment casting plants and die casting plants, so we can customize Aluminum or Stainless Steel Safety Rail Fittings for customers.

The Double Swivel Combination works well when there is a column at the junction of the stairs and the landing, and we need to add some horizontal railings on top of it. It connects two pipes simultaneously and makes them parallel to the faces of the stair and landing respectively. The handrail system installed in this way will be more beautiful. HULK Metal uses ductile iron and malleable steel as raw materials for Double Swivel Combination to make it safer and more reliable. Pipe Handrail Fittings can become more rust-resistant and beautiful after being galvanized and powder coated. Every customer who has purchased Pipe Handrail Fittings from HULK Metal has chosen a long-term cooperation.

Double Male Section of Structural Pipe Fittings is used together with the 173F Female Section of the Swivel to add two rotatable railings to the upright. These two railings can be adjusted separately with an uprights angle. It can be applied to many application scenarios. We can provide you with excellent production service. Because we have a full set of molds, we can complete orders faster. We can provide Ductile Iron, Malleable Steel, Stainless Steel, Aluminum Double Male Section of Pipe Swivel Fittings, as well as powder coating, and galvanized surface treatment services. If you have any needs, you can contact us at any time.

Corner Swivel Combination 168 can add two railings to the Railing System that can freely adjust the angle between uprights and uprights. The angle between its two sleeves is 90 Degrees, which makes it suitable for adding Guardrail System to areas requiring right angles or adding Handrail System to ladders and platforms at right angles. It is generally made of ductile iron or malleable steel, and after surface treatment such as galvanizing and powder coating, it can have excellent mechanical properties, corrosion resistance, and rust resistance. We provide the production service of Corner Swivel Combinations in various pipe types. If you have purchasing needs, you can contact us to obtain product catalogs and quotations.

The Swivel Base Flange is a very flexible Safety Railing System base. Its sleeve can be freely transformed within a range of 180°, which makes it suitable for many scenes. Our factory has passed the ISO 9001 certification, which can provide higher quality Swivel Base Flange, and all Safety Railing Fittings will go through strict testing. After galvanizing and powder coating, it has better anti-rust and corrosion resistance, which allows us to use it in harsher environments and last longer. Safety Railing Fittings has a lot of uses, not only for building guardrails or handrail systems but also for DIY some furniture. We are a manufacturer, if you need to buy large quantities of Safety Railing Fittings, we can get you a better price.

Singe Swivel Combination can add a freely rotating railing to one side of uprights. Its installation is very simple. And the Singe Swivel Combination, which has been galvanized and powder-coated, can be used for a longer period of time in many harsh environments. As an experienced Handrail Pipe Fittings manufacturer, we have provided production services for hundreds of purchasing purchasers. Because our delivery time is shorter, the price is right, the quality is very good, and the service is very considerate, so they are all satisfied with us. In order to better serve customers, we have made a full set of molds for Handrail Pipe Fittings and formed a complete service team. You can contact us if you have any needs.