How are truly high-quality structural pipe fittings delivered from the factory?

Pipe Clamp Fittings Two Socket Cross 119 has a through hole and two sockets perpendicular to the through hole. The whole structure is on the same plane. The through hole can be set on the pipe, and the screw is tightened to fix it; inserted two tubes are into the sleeve, and a cross structure can be obtained by tightening the screw. This type of pipe clamp fittings is often used to increase the density of the horizontal pipes of the handrail or guardrail system.

128 Side Outlet Elbow is a type of structure used in Pipe Rail Fittings to provide three perpendicular surfaces for guardrails, handrails, workbenches, and table supports. Based on the 90°2 Way Elbow, two sockets are extended on one side. The other vertical socket can use three pipes to form three mutually perpendicular planes. The other end of the pipe can be connected with other Pipe Rail Fittings. It is made of aluminum alloy, malleable steel, stainless steel, ductile iron, and other materials. After surface treatment, such as powder coating and galvanizing, it will have different anti-rust capabilities and appearances. It only has three fastening screws and is easy to install.

158 Four Socket Cross is a kind of Safety Rail Fittings that can add four safety rails to the column, the pipes are on the same plane, and the adjacent two are vertical. We can use it to build simple shelves or build safety fences to divide the area where goods are stored, or DIY other structures. The 158 Four Socket Cross produced by HULK Metal is made of malleable steel and ductile iron, and its surface treatment is mainly galvanized and powder sprayed. Our supply chain has high-standard investment casting plants and die casting plants, so we can customize Aluminum or Stainless Steel Safety Rail Fittings for customers.

The Double Swivel Combination works well when there is a column at the junction of the stairs and the landing, and we need to add some horizontal railings on top of it. It connects two pipes simultaneously and makes them parallel to the faces of the stair and landing respectively. The handrail system installed in this way will be more beautiful. HULK Metal uses ductile iron and malleable steel as raw materials for Double Swivel Combination to make it safer and more reliable. Pipe Handrail Fittings can become more rust-resistant and beautiful after being galvanized and powder coated. Every customer who has purchased Pipe Handrail Fittings from HULK Metal has chosen a long-term cooperation.

Corner Swivel Combination 168 can add two railings to the Railing System that can freely adjust the angle between uprights and uprights. The angle between its two sleeves is 90 Degrees, which makes it suitable for adding Guardrail System to areas requiring right angles or adding Handrail System to ladders and platforms at right angles. It is generally made of ductile iron or malleable steel, and after surface treatment such as galvanizing and powder coating, it can have excellent mechanical properties, corrosion resistance, and rust resistance. We provide the production service of Corner Swivel Combinations in various pipe types. If you have purchasing needs, you can contact us to obtain product catalogs and quotations.

The Swivel Base Flange is a very flexible Safety Railing System base. Its sleeve can be freely transformed within a range of 180°, which makes it suitable for many scenes. Our factory has passed the ISO 9001 certification, which can provide higher quality Swivel Base Flange, and all Safety Railing Fittings will go through strict testing. After galvanizing and powder coating, it has better anti-rust and corrosion resistance, which allows us to use it in harsher environments and last longer. Safety Railing Fittings has a lot of uses, not only for building guardrails or handrail systems but also for DIY some furniture. We are a manufacturer, if you need to buy large quantities of Safety Railing Fittings, we can get you a better price.

The end cap 184 is used to plug the pipe. It is difficult to pull out after installation. It is usually only used at the end of the pipe. It can be replaced with 133. We can provide a variety of highquality surface treatments, such as hot galvanized, double galvanized powder coating to meet your requirements. We have a fully equipped quality control center to test surface quality and attach detailed inspection reports to each batch of orders.